IN-80L Super Large Bore Inflator Adapter (Replaces IN-80A)

REPLACED BY IN80L

The Haltec design of the Super Large Bore inflator adapter offers many advantages.

1/2" pipe thread for easy air hose connection. During inflation, air pressure in the tire can be checked through the stem knob with a tire pressure gauge.

Reduces inflation time 60%, deflation time 80%.

The core housing is held in a stainless steel extractor by a snap ring.

Extractor is rugged enough so that the core housing can be loosened or tightened without being damaged. The IN-80A inflator adapter saves time by fast inflation or deflation on a tire. After removing the valve cap, the inflator is screwed onto the valve stem. The inflator stem is pushed in to engage the flats on the core housing. By rotating the stem counter clockwise, the core housing can be removed without any danger to the person removing it. The core housing is pulled up into the inflator body and held there during inflation or deflation. Can also be used for liquid-filling tires equipped with Super Large Bore valves.

ASCOT # 466-05310

About this part

The IN-80L is the Haltec super large bore inflator adapter, the replacement for the earlier IN-80A. It screws onto the valve stem after the cap is removed, and its stem pulls the core housing up into the inflator body so the tire can be inflated or deflated quickly. It can also be used to liquid-fill tires with super large bore valves, and shops list it as an inflation chuck.

Also called: heavy duty bore, truck bore, inflation tool, big bore, hal-tec, check valve, extensions, spuds, adapters, valve tools, 57 bore cap

Also listed as: IN-80L, IN-80A, 466-05310

Borg item #:

HAIN80A

California Prop 65 Warning:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov