23104 Ford Cam/Cas Sleeve 1 Degree

23104 Ford Cam/Cas Sleeve 1 Degree

âš  WARNING: This product is known to California to cause Cancer and or Reproductive Harm - www.P65Warnings.ca.gov.

Change camber, caster or both at the same time with this sleeve. Simply remove the tire, cotter pin, and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 to determine the change needed, then install the correct sleeve. To adjust, the sleeve may be lifted and rotated 1/8 turn.

• Total Change: 1.00 Degree (1 Degree)

• Front Adjustment Range: Camber/Caster ±.25° to ±2.75° 

• Installation time: .5 hr/side 

• Required: 1 Per Wheel

• Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller

Applications:

 Ford 4WD: 1980 - 98 F250, F350, 1980 - 03 E250, E350, E450, Bronco - Full Size 1980 - 96 F150, F250 (L/D)

Ascot No. 231-23104