23124 Cam/Cas 4WD Sleeve 1 Degree

23124 Cam/Cas 4WD Sleeve 1 Degree

âš  WARNING: This product is known to California to cause Cancer and or Reproductive Harm - www.P65Warnings.ca.gov.

Change camber, caster, or both at the same time with this sleeve. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23129 to determine the change needed, then install the correct sleeve. To adjust, the sleeve may be lifted and rotated 1/8 turn.

• Front Adjustment Range: Camber/Caster ±.25° to ±2.00º

• Total Change 1.00 Degree (1 Degree)

• Installation Time: .5 hr/side

• Required: 1 Per Wheel

• Applications: Ford 4WD:1983 - 89 Bronco II 1990 (Early) Bronco II 1983 - 89 Ranger

Ascot No. 231-23124