ASMTS925 5-Tiers Tire Shelving

  

Tire storage capacity

Each tier holds 10-12 passenger or light truck tires, for a total of 50-60 tires per rack. Each of the 5 tiers can take up to 500 lbs. The sectional rails are tilted to 45 degrees to properly seat the tires, leaving them less marked at the end of the season. This rack is also easier to load and unload than standard pallet racks.

The shelves are adjustable in 1½” increments, allowing the tiers to be adjusted to suit the tire sizes. It is easier to put the heavier tires in the bottom tier to facilitate the task for employees. A special ladder might be nessary to do the picking on the last tier, ask your sale representative about it.
 

The shelf unit sets up with ease in 30 minutes. A screwdriver for the centre braces and a hammer, or preferably a rubber mallet, is needed to attach the uprights to the rails. The clip fasteners work with no additional hardware, similar to Baby Rack or Ready Rack systems.

The legs are drilled for floor fasteners included in the box. In some areas, floor anchoring is mandatory. Wall brackets are also included and are usually mounted at the top of the rack to provide greater stability for unloading from the top tier. Martins Industries strongly recommend to anchor the shelving to the wall and to the floor.  The same brackets can be used to attach one rack in front of another. Plate fasteners are used to attach them side by side. Assembled in this way, the shelving racks form a sturdy unit. Although Martins Industries does not include installation, we can refer you to an installer for larger numbers of units.

 

Specifications

Dimensions (LxWxH)     92'' X 18'' X 150''

Tire capacity                     50 to 60 (10 to 12 per tier)

Loading capacity             500 lbs / 227 kg (per tier)

 

Weight                               170 lbs / 85 kg

Colour                                Gray