ASMTS924 4-Tiers Tire Shelving
âš WARNING: This product is known to California to cause Cancer and or Reproductive Harm - www.P65Warnings.ca.gov.
ASCOT No. 751-00924
The 4-tiered tire shelving rack is perfect for small numbers of tires, either alone or mounted on rims. Whether you use it to hold your customers’ tires or to store tires for sale, keeping them on their treads instead of stacking them flat saves a lot of time. The lenght and the width of the rack is the same as the 3 tiers tire shelving and the 5 tiers tire shelving. Only the height varies from one model to another.
Tire storage capacity
Each tier holds 10-12 passenger or light truck tires, for a total of 40-48 tires per rack. Each of the 4 tiers can take up to 500 lbs. The sectional rails are tilted to 45 degrees to properly seat the tires, leaving them less marked at the end of the season. This rack is also easier to load and unload than standard pallet racks.
The shelves are adjustable in 1½” increments, allowing the tiers to be adjusted to suit the tire sizes. It is easier to put the heavier tires in the bottom tier to facilitate the task for employees. A special ladder might be nessary to do the picking on the last tier, ask your sale representative about it.
Shelving installation
The shelf unit sets up with ease in 25 minutes. A screwdriver for the centre braces and a hammer, or preferably a rubber mallet, is needed to attach the uprights to the rails. The clip fasteners work with no additional hardware, similar to Baby Rack or Ready Rack systems.
The legs are drilled for floor fasteners included in the box. In some areas, floor anchoring is mandatory. Wall brackets are also included and are usually mounted at the top of the rack to provide greater stability for unloading from the top tier. Martins Industries strongly recommend to anchor the shelving to the wall and to the floor. The same brackets can be used to attach one rack in front of another. Plate fasteners are used to attach them side by side. Assembled in this way, the shelving racks form a sturdy unit. Although Martins Industries does not include installation, we can refer you to an installer for larger numbers of units.
Tire warehouse planning
Martins industries offers a warehouse storage planning service free of charge. For determining the right aisle widths and rack arrangements, our warehouse experts can come to your facility and produce a plan to store a maximum number of tires per square foot.
Specifications
Dimensions (LxWxH) 92'' X 18'' X 120''
2337 X 457 X 3048 mm
Tire capacity 40 to 48 (10 to 12 per tier)
Loading capacity 500 lbs / 227 kg (per tier)
Weight 140 lbs / 64 kg
Colour Gray
***FREIGHT CHARGES MAY APPLY
NOTE: Forklift needed to offload these products, if not available a lift gate charge
will be added to the cost.
Please indicate in the order notes that you will be needing a lift gate to offload the product.
LIFT GATE CHARGE COST: TBD.
***Shipping / Freight / Lift Gate charges are for the continental U.S. only;
Excluding Alaska & Hawaii and all off-shore U.S. territories and possessions.
